Flow & Current Meters
Datalogger Sensors
Water Quality Meters
Flow & Current Meters
Sampling Instruments
Ground Water Instruments

Flow & Current Meters

Swoffer 2100 Indicator


Velocity Range: 0.1 to 25 Feet Per Second (0.03 to 7.5 Meters Per Second)

Display: 4 digit, Liquid Crystal Digital, 7lg digits.

Resolution: To hundredths, both feet and meters.

Accuracy: Can be held to within 1% with periodic user required calibration tests and adjustments.

Display Averaging: Three selectable averaging times: 5, 20 and 90 seconds-FPS mode. 1.5, 6 and 30 seconds-MPS mode.

Operating Temperature: LCD Min.-14 F (-25.6C) Max. 180F (82C) @ 15% humidity, Max. 120F (49C) @ 95% humidity. Sensor Min. 0 F (-17.8C) Max. 300 F (149C)

Power Required: One 9 volt battery. Alkaline or rechargeable NiCad.

Indicator Size: 4 by 6 by 2 inches (15.2 by 10.2 by 5.1 cm).

Indicator Weight: 25 oz. (including 9 volt batteries, one spare).

Indicator Material: Vacuum-formed ABS with a clear acrylic viewing lens over the LCD.

Indicator Keypad & Switches: Back-printed polycarbonate in four colors plus black. Two pushbutton momentary switches, one rotary switch with silicone boots for water seal.

Fasteners: Stainless Steel & Brass.

Sensor Wand Materials: Aluminum = 6061-T6, Stainless Steel = #303

Sensor Body & Materials: Acetal-resin, carbon reinforced and machined from solid stock.

Sensor Propeller: Glass-filled nylon. 2" diameter is supplied. Other sizes are available for special applications.

Electrical Connection: Hyper-flexible PVC jacketed cable. Two-conductor sensor signal system. Circular plastic connector with twist-lock operation. Water resistant with gold plated contacts. Special cable types also available.

Cable Length: Equal to wand at full extension plus five feet. Special lengths to 1000 feet are also available.

Sensor Type: Photo-Fiber-Optic - two conductor electrical with all electronics permanently encapsulated in epoxy resin.

Copyright 2001 Geo Scientific Inc., All Rights Reserved
Home | Contact Us